Frequently Asked Questions

We do our best to make sure any and all questions for our products and business are easy to get to. Please see below for the most commonly asked questions and associated answers.

What is an inert material?

An inert material is an inactive substance, in which nothing will react with it, within the environment of the materials designed use. There will be no outgassing, no corrosion, and no change of the material into something it's not designed to change into. In order to classify a material as inert, one needs to consider the materials' environment of use. For example, the 'hot zone' of our desktop vaporizer apparatus, where temperatures can reach over 1400°F, we exclusively feature inert materials, ceramic (alumina oxide) and borosilicate glass. In the dry herb vaporization zone, where temperatures can reach ~421°F, we exclusively feature inert materials silicone and titanium. In a vaporizer apparatus, the materials must also be designed for use, to not react with the different plant materials being vaporized. The Desktop Pro sets these market standards by putting this goal at the forefront of our design.

https://youtu.be/WDnonBwKDHE

What is Borosilicate Glass?

Borosilicate glass is a glass that contains boron trioxide allowing for an extremely low coefficient of thermal expansion. An extremely low coefficient of thermal expansion means under extreme temperature fluctuations it will not crack like regular glass. Its stability and strength have made it the glass of choice for high heat applications, like the convection chamber of a vaporizer.

https://youtu.be/tt7hzaYKWpo

What is borosilicate glass heat cover?

A borosilicate glass heat cover is the type of glass used for the heat cover on the Desktop Pro Vaporizer to ensure optimal temperature for all day use.

What is a Poly-carbonate Shield?

Polycarbonate is a robust, transparent plastic material with exceptional impact resistance, stiffness, and strength.  A polycarbonate shield is used on the Desktop Pro Vaporizer to protect the user from the hot heater cover during use.

https://youtu.be/zZhg5D84pCU

What is a whip style desktop dry herb vaporizer?

Whip-style dry herb vaporizers are tabletop vaporizers that heat the dry herb through convection and employ a “whip” attachment as their method of inhaling the vapor. A whip is made up of three main parts - the wand (glass piece where the dry herb is loaded), the tubing (silicone recommended) and the mouthpiece (borosilicate glass recommended).

How to disassemble a wand and whip for cleaning?

To disassemble a wand and whip for cleaning or servicing:

  1. Read the user manual for safety instructions.
  2. Remove all debris from the wand near the screen. 
  3. Hold the wand and the silicon hose while pulling and twisting the wand and hose apart. Be careful not to let the mouthpiece fly free during this process as it may hit and break something. 
  4. Follow the same process to disassemble the mouthpiece from the whip.  If the silicone is old and difficult to remove from the mouthpiece, you may have to cut off as little as necessary.
  5. Now that the wand is free, use a long skinny tool like a popsicle stick, pencil, or skewer to push the filter out.


To reassemble silicone hose, wet lightly to lubricate for installation.

How to clean a desktop dry herb vaporizer?

Items you will need to clean a desktop dry herb vaporizer:

  • 50-70% Isopropyl Alcohol (do not use higher than 70% Isopropyl as it is less effective at disinfecting)
  • Table salt
  • Cleaning Brushes, pipe cleaner, etc.
  • Distilled water
  • Plastic or Wood bowl
  • Rubber gloves

 

Parts cleanable by this method: Heater Cover and Wand & Whip assembly.

  1. Read the user manual for safety instructions. Then, follow the instructions “How to disassemble a wand and whip for cleaning”.
  2. Next, put on your rubber gloves.
  3. Place your wood or plastic bowl in a sink or over a drain.
  4. With your bowl in the sink, place a small amount of alcohol and table salt in the bowl and use the brush to clean each component. Try to get salt worked into the bristles of the brush for better cleaning action.
    For the hard to reach spots, cover bottom hole of the part with fingers, fill the components halfway with alcohol and salt, cover the remaining holes with fingers and gently shake to use the salt to agitate and scrub debris from the part walls.
  5. Once you finish cleaning with the brush and salt/alcohol mix, rinse each component with water before letting parts sit to dry on paper towel.

If herbal contaminants come into contact with the element, you can sterilize the element by simply turning the unit on to full power for 10 minutes and the temperatures reached will burn off herbal contaminants.

How to install a screen in the wand?

To install a screen on a dry herb desktop vaporizer:

  1. Use extra included grade 2 titanium ⅝” screens.
  2. Gently bend the screen like you would hold a taco, as minimal as necessary in order to slide it into the tapered end of the glass wand. Push it as far as you can with your finger.
  3. Use our Scepter tool or other long tool like a pencil to turn it as you push in, so that the screen gets caught on the inside lip.
  4. Once in place, the screen should sit concave or rounded bent inward towards the silicone tube end of the wand, in order to be stuck in place. If your screen doesn’t fit, please check to make sure you’ve purchased the correct Onsen Labs replacement screens size.
How to store my dry herb vaporizer?

Desktop dry herb vaporizers should be stored in a clean, dry environment and out of reach of children and pets.

  1. To store the device, wait at least one hour to cool with the power off and the cord unplugged
  2. Carefully wrap the wand and whip assembly into a double loop, secure the velcro straps and store in the Carbon Smell bag or a sanitary ziplock bag.
  3. Place the device in the large storage area of the bag, making sure to zip closed and secure the zipper locks.
How to remove the glass heat cover?

To remove the glass heat cover on a desktop dry herb vaporizer:

  1. Be sure the device is powered off, unplugged, and has had at least one (1) hour to cool.  
  2. Read user manual for safety instructions.
  3. Place the device on a work surface in which you have enough elbow room
  4. Apply slow direct upward pressure on the heater cover with both hands.  Slight twisting may help.
  5. Once the heater cover has slid off the bottom seal, place one hand on the device grasping it around the outer glass and press downward towards the work surface
  6. Use your other hand to slowly pull directly upward in a gentle, controlled manor. Pulling too hard or too fast will pop the heater cover off, potentially damaging the element.

Be sure not to touch or bump the ceramic heating element while the glass heater cover is removed. If you do accidently, turn the element on full power for 10 minutes to sterilize the element.

How to replace the glass cover seals?

It is unnecessary to replace your glass cover seals unless you damage one or it’s the first time you are installing a new heater cover.
To replace the glass cover seals on the Desktop Pro Vaporizer:

  1. Turn the vaporizer off and unplug to allow at least one (1) hour for cooling.
  2. Read the user manual for safety warnings.
  3. Follow the instructions to remove the glass heater cover.
  4. Next, using a plastic pick, toothpick, or tweezers, carefully find the area where the seal is split on an angle in two and separate the old seal until it falls free of its groove.
  5. Now remove the second seal.
  6. Install the replacement seals by carefully sliding them over the element and into their grooves, being careful not to touch the element.
  7. Install the bottom seal first.  Do not overstretch the seals as they are delicate and once stretched;they do not shrink to their original shape on their own. When sliding the bottom seal on first, be careful not to let it get caught in the top seal groove.
  8. Slide on the top seal. If you do this out of order, the bottom seal will need to be overstretched in order to pass the top seal. If you overstretch the seal, remove and bend to shape, then try again.
  9. Once both seals are set in place and not overstretched, use a hairdryer to apply heat for 30-60 seconds; warming the base opening of the glass heater cover will help the seals conform to the various tolerances of each individually handmade glass heater cover.
  10. Use an oven glove if necessary, and slowly and evenly press the heater cover over the first seal, then very slightly rotating the heat cover on a very slight angle back and forth as you push down. The rotating angle will inch the cover downward into place. Do not force this fast; the heat is required to transfer from the heater cover and conform the new seals. While doing this, also carefully guide the heater element through the narrow inner glass heater cover, being sure NOT to hit the ceramic on the glass. Continue to push until the heater cover is almost touching the bottom white base. Use alcohol wipes to sanitize the heater cover for when bare hands touch it.
  11. Once the heater cover is cooled and installed with new seals, we need to do one final step; slowly pull it back off, just partially in order to dislodge any melted bond between the seal and heater cover.
  12. Then press back on firmly. From here, future removal is easy, as the new seals are now fitted to your specific glass heater cover.

Before sliding the glass heater cover over the base, take note of the heater element and its close fit between the inner hole within the glass heater cover.

Do Not Force the heater cover, it should gently slide with firm pressure.  

How to Install The Glass Heater Cover?

To install a new glass heater cover on a desktop dry herb vaporizer:

  1. Thoroughly inspect the glass heater cover and follow cleaning instructions if required.
  2. Check the glass heater cover seals to ensure they are fully mounted within their grooves. If the glass heater cover seals are damaged or will not fit within their grooves, please follow the instructions to replace them by clicking here. You are now ready to install the glass heater cover.
  3. Place your dry herb Desktop Pro Vaporizer on a work surface in which you can situate yourself above the device with elbow room.
  4. Use a hairdryer to warm the base opening of the glass heater cover. Apply heat for 30-60 seconds. The heated glass will help the seals conform to the various tolerances of each individually handmade glass heater cover.
    Before sliding the glass heater cover over the base, take note of the heater element and its close fit between the inner hole within the glass heater cover.

    Do Not Force the heater cover, it should gently slide with firm pressure. 

  5. Use an oven glove if necessary, slowly and evenly press the heater cover over the first seal, then very slightly rotating the heat cover on a very slight angle back and forth as you push down. The rotating angle will inch the cover downward into place. Do not force this fast; the heat is required to transfer from the heater cover and conform the new seals.
    While guiding the heat cover onto the seals, also carefully guide the heater element through the center inner glass heat cover opening, being sure NOT to hit the ceramic on the glass. This is a delicate process. 

  6. Once the heater cover is cooled and installed with seals, we need to do one final step; slowly pull it back off, just partially in order to dislodge any melted bond between the seal and heater cover.

  7. Press back on firmly. From here, future removal is easy, as the new seals are now fitted to your specific glass heater cover.
What is the warranty of the Desktop Pro Vaporizer?

Onsen Labs provides a one-year warranty on all Onsen Labs brand vaporizers based on date of purchase. At its option, Onsen Labs will repair or replace the unit if it is found to be defective as to workmanship or materials. This warranty does not extend to damage resulting from misuse, neglect or abuse, normal wear and tear, or accident. Accordingly, this warranty does not extend to broken glass as a result of misuse, neglect or abuse, or accident. This warranty extends only to the original consumer purchaser.

IN NO EVENT SHALL ONSEN LABS BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR USE, OR OF ANY OTHER NATURE. Some states do not allow this limitation on an implied warranty, so the above limitation may not apply to you.

If a defect arises within the warranty period, promptly contact Onsen Labs, 2848 Corporate Pkwy Algonquin, IL 60102 using our toll-free number 833-667-3652. Our E-mail address is warranty@onsenlabs.com. Goods will not be accepted for return unless an RMA (returned materials authorization) number has been issued.

Prior to returning defective products under warranty, customer shall ensure that all equipment is clean before shipment. Additionally, the customer must include the RMA number on all sides of the package to be returned.

The customer shall be responsible for shipping charges. Please allow a reasonable period of time for completion of repairs or replacement. If the unit is replaced, the replacement unit is covered only for the remainder of the original warranty period dating from the purchase of the original device. This warranty gives you specific rights, and you may also have other rights which vary from state to state.

https://www.youtube.com/watch?v=FRExZwPX0xs&feature=youtu.be

Still Looking?

If you did not find what you were looking for, please go to our Contact page and we'll respond ASAP.

Loading...
Loading...

Onsen Labs

You must be at least 18 years old to purchase products on OnsenLabs.com

Are you 18 or above?